|
|
12pc S/K 1/4 metric 6pt universal set
|
| |
Lifetime warranty 12 piece set is made in the U.S.A., featuring SK's high polish SuperKrome™ finish which protects
the tools from the harsh working environments found in today's workplace. Provides long life and maximum corrosion resistance.
All sockets feature SK's SureGrip™ hex design, which drives the side of the fastener, not the corner, to avoid edge
breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. SK flex sockets
provide greater accessibility in tight spaces by allowing an indirect approach to the fastener. Sizes include: 5mm, 5.5mm,
6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm
$168.00 
|
|
|
|
|
This set removes and replaces ball joints.The C-frame press alone can also be used to remove and replace
universal joints.Ball joint removing/installing set for most press-fit ball joints. Wt., 15 lbs., 3 oz
|
|
|
KD Tools
12 Piece Fuel and Trans Line Disconnect Tool Kit
- Laminated bilingual instruction card integrated into case design - handy reference of application
information
- Individual part numbers molded into case for easy reference
Applications:GM and Ford Disconnect
Tool for vehicle which easily separates spring coupling fittings on fuel lines and air conditioning systems. Ford Fuel Line
Coupling Tool provides damage-free fuel line separation on vehicles with quick-disconnect fittings: 1990 - current Ford Rangers
and Explorers w/4.0 L, 6 cylinder engines. Ford Hydraulic Clutch Line Disconnect Tool removes hydraulic clutch lines from
clutch slave cylinders on some manual transmissions: 1989-current Mercury Cougars and Thunderbirds; 1988-current small trucks
including Explorer, Ranger and Bronco II. Chrysler Quick Disconnect Coupler Tool. Ford EFI Fuel Line with Hair Pin Connector
Tool also works on transmission oil cooler lines on: 1987-current Olds Toronado, Buick Riviera and Reatta, Cadillac Eldorado,
Seville and Concours; and 1989-current GM 1/2, 3/4, and 1 - ton pickups. GM Hydraulic Clutch Line Disconnect Tool removes
clutch lines from slave cylinders during clutch master cylinder, slave cylinder or clutch assembly service. Bent end applications:
NVG3500 manual transmissions on 1966-current full-size 2WD and 4WD trucks, S-10s, and S-15 Blazers/Jimmys. Straight end applications:
1993-current Pontiac Grand Prix, Olds Cutlass Supreme, Buick Regal; 1993-94 Chevy Lumina; and 1995-current Chevrolet Monte
Carlo. GM Transmission Oil Cooler Line Disconnect Tool. Ford Oil Cooler Line Disconnect Tool disconnects transmission to radiator
oil cooler line quick connect fittings: 1986-current Sable and Taurus with AOD, ATX, or AXOD transmissions. Fuel Line Disconnect
- 1/4 in. (Black):1995-96 Mustang. Fuel Line Disconnect - 5/16 in. (Red): 1990-current Aerostar, Explorer and Bronco; 1991-current
E and F Series; 1992-current Ranger; 1992-current GMs. Fuel Line Disconnect - 3/8 in. (Gold): Same as 5/16 in. , and for new
style 3/8 in. oil cooler lines: 1994-97 Dodge Ram V6 and C8 trucks; 1995-1996 Dodge Ram Van/Wagon. Oil Cooler Line Disconnect
(Blue): Ford Taurus and Escort with AXOD and ATX transmissions. Replacement Bands.
|
|
 |
|
|
|
|
Easily removes damper pulleysFits into tight engine compartments, no need to remove radiator3/8"
drive for use with ratchet3/4" drive for wrench or socket useUpdated and expanded coverage of the popular
OTC6267This puller fits the following applications: virtually all Chrysler and Mitsubishi vehicles (same as P/N 6267
but with updated applications), 4.2L I6 Trailblazer, Envoy and Bravada 2003 - current, 4.2L I6 Rainier 2004 - current, 3.5L
I5 Colorado and Canyon 2004 - current, 3.5L I5 Hummer H3 2006 - current, 2.8L I4 Colorado and Canyon 2005 - current.
Kit contains the 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8" square drive for ratchet
use, and a 3/4" hex for wrench or socket
|
|
|
|
|
|
SENSOR AND SENDING UNIT SET
7 Pc.
Sensor and Sending Unit Socket Set",Astro Pneumatic",Features and Benefits:1” & 1-1/16” Oil pressure
sending unit socket 1-3/16” Oil pressure sending unit socket<1-1/16” GM thermal sensor switch socket<7/8”
Heated oxygen sensor socket</7/8” Low profile offset oxygen sensor socket7/8” Oxygen sensor socket 7/8”
Universal vacuum PVS, TVS Valve and oxygen sensor socket
|
|
|
|
|
|
|
